==================================================================================
Software Kit v3.03-00
Copyright (c) 1994-2000 Mylex Corporation.
==================================================================================

- Place a 1.44MB DOS or Windows formatted diskette in drive A:
- Double-Click on the file "mdacnw.exe"
- Follow the instructions on the screen

NetWare 4.2 & 5.x 

Following files will be extracted on the floppy disk.

05/09/00  10:07a                 5,252 MDAC.DDI
09/20/00  08:47a               199,048 MDAC.HAM


-  When using NetWare 4.2 with the DOS ASPIDAC.SYS driver, you 
   must shutdown the system before exchanging the CD media.  If 
   this is not done the media will not be recognized.

-  NetWare 4.2 will fail to install if the CD-ROM is attached to 
   an AcceleRAID 352, eXtremeRAID 2000, or eXtremeRAID 3000 
   controller.  To install NetWare 4.2, attach the CD-ROM to an 
   HBA, IDE or other controller.

-  The Operating System drivers included in this Software kit v3.03-00
 support Mylex controllers with 4.x firmware or later.


- If you are currently using an existing version of GAM Server, 
  Mylex recommends that you do not uninstall this version prior to 
  upgrading to the version included on this SWKIT CD. With the old 
  version still installed and running, just insert the SWKIT CD and 
  run the new setup.exe application by choosing the 'Install Global 
  Array Manager' option from the Main Menu of the Autorun 
  application.  Follow the procedures documented in the SWKIT 
  Installation Guide and User Manual to install the GAM Server 
  software.

  The reason for this is as follows:
  If an old GAM Server (2.21-xx) is uninstalled and no reboot 
  is performed, installing GAM server from the CD-ROM will 
  result in the GAM Driver not loading on the next reboot.  
  This will not occur if the user installs the new server over 
  the top of the old one while it is still running.

  
  If the existing GAM Server has been uninstalled, be sure to 
  reboot the system before installing the new version from this 
  SWKIT CD-ROM or the files which has been down loaded from the 
  Mylex web site.


- If the GAM Server & Workstation Array Manager are installed on 
  the same system and one of them is uninstalled, the other will 
  no longer work because the GAM Driver will get uninstalled.

  

- The Global Array Manager Server is not supported on Windows 9x.